Activation Energy & Catalysts
Explore energy profiles, the Arrhenius equation and how a catalyst lowers the barrier
Reaction energy profile(drag the peak or the products level)
Exothermic: products are 40 kJ/mol lower than reactants, so heat is released.
Arrhenius at 300 K
- A (assumed)
- 1.0 × 10¹³ s⁻¹
- Ea / RT
- 30.07
- k forward
- 0.873 s⁻¹
- k reverse
- 9.46 × 10⁻⁸ s⁻¹
- Slope of ln k vs 1/T
- -9021 K
Two-temperature calculator
T₁ = 300 K, T₂ = 310 K
k₂/k₁ = exp[(Ea/R)(1/T₁ − 1/T₂)]
= exp[9021 × 1.075 × 10⁻⁴]
= 2.64
2.64 times faster at 310 K. A 10 K rise doubles the rate at 300 K only when Ea ≈ 53.6 kJ/mol.
k = A e^(−Ea/RT) against T
The curve rises exponentially, so at low T it looks flat on this scale. The ln k plot shows every temperature clearly.
Arrhenius plot: ln k against 1/T
Energy profiles and the Arrhenius equation
An energy profile follows the energy of the reacting system along the reaction coordinate, the path from reactants to products. On the way, the atoms pass through the transition state, the highest point on the path. The activation energy Ea is the climb from reactants to that peak. The reverse reaction has to climb from the products, so its barrier is Ea − ΔH.
Svante Arrhenius found that rate constants follow k = A e^(−Ea/RT). The exponential factor is the share of collisions with enough energy to cross the barrier, and the pre-exponential factor A collects the collision frequency and the orientation requirement. Taking logarithms gives ln k = ln A − (Ea/R)(1/T), a straight line when ln k is plotted against 1/T. The slope is −Ea/R, which is how activation energies are measured in the lab.
A catalyst does not push molecules over the same hill; it provides a different path with a lower top. Because the exponent is divided by RT, even a modest drop in Ea gives a huge speed-up: lowering the barrier by 20 kJ/mol at body temperature makes a reaction about 2300 times faster.
The energy barrier
ΔH is separate from Ea
Temperature and k
Catalysts open a new route
Key formulas
Arrhenius equation
k = A e^(−Ea/RT)
- k
- rate constant
- A
- pre-exponential (frequency) factor, same units as k
- Ea
- activation energy (J/mol)
- R
- 8.314 J/(mol·K)
- T
- absolute temperature (K)
Linear form (Arrhenius plot)
ln k = ln A − (Ea/R) × (1/T) slope = −Ea/R
Two temperatures
ln(k₂/k₁) = (Ea/R)(1/T₁ − 1/T₂)
Barriers on an energy profile
Ea(reverse) = Ea(forward) − ΔH; k_cat/k = e^((Ea − Ea,cat)/RT) for the same A
How much faster for a 10 K rise?
| Ea (kJ/mol) | Rate increase from 298 K to 308 K |
|---|---|
| 25 | 1.39 |
| 50 | 1.93 |
| 75 | 2.67 |
| 100 | 3.71 |
| 150 | 7.14 |
The familiar rule that a 10 K rise doubles the rate only holds for Ea of about 50 kJ/mol near room temperature.
How to use this visualizer
- 1Set Ea and ΔH with the sliders, or drag the red peak and the blue products level directly on the energy profile.
- 2Make ΔH negative for an exothermic reaction and positive for an endothermic one. Watch the reverse barrier Ea,rev = Ea − ΔH change with it.
- 3Tick Add a catalyst. A dashed green path with a lower barrier appears; drag its peak or use the Catalysed Ea slider. The reactant and product levels do not move.
- 4Move the temperature slider. The point on the k vs T curve climbs steeply, while on the ln k vs 1/T plot it slides along a straight line with slope −Ea/R.
- 5Compare the two lines on the Arrhenius plot with the catalyst on. The catalysed line is less steep (smaller Ea) and lies above the uncatalysed one.
- 6Use the two-temperature calculator to see how many times faster the reaction becomes for a +10 K rise, or any other change.
Common misconception
A catalyst does not change ΔH or the position of equilibrium, and it does not only speed up the forward reaction. It lowers the barrier for the forward and reverse reactions by the same amount, so equilibrium is reached sooner but at the same composition.Practice problems
Problem 1: Ea from two rate constants
Show solutionHide solution
ln(k₂/k₁) = ln(1.0 × 10⁻² / 2.0 × 10⁻³) = ln 5 = 1.609
1/T₁ − 1/T₂ = 1/300 − 1/320 = 2.083 × 10⁻⁴ K⁻¹
Ea/R = 1.609 / 2.083 × 10⁻⁴ = 7725 K
Ea = 7725 × 8.314 = 64 230 J/mol ≈ 64.2 kJ/mol
A = k₁ e^(Ea/RT₁) = 2.0 × 10⁻³ × e^(7725/300) = 2.0 × 10⁻³ × e^25.75
A = 2.0 × 10⁻³ × 1.53 × 10¹¹ ≈ 3.1 × 10⁸ s⁻¹
Ea ≈ 64 kJ/mol, A ≈ 3.1 × 10⁸ s⁻¹
Problem 2: An enzyme at body temperature
Show solutionHide solution
k_cat/k = e^((Ea − Ea,cat)/RT) = e^(20 000 / (8.314 × 310))
exponent = 20 000 / 2577 = 7.760
k_cat/k = e^7.760 ≈ 2.34 × 10³
Same k with the same A needs the same Ea/T: 80 000/T = 60 000/310
T = 310 × 80/60 = 413 K (about 140 °C)
About 2300 times faster; the uncatalysed reaction would need about 413 K
Related visualizations
Discussion
Questions, ideas or a different approach? Join the conversation.